NetScaler CVE-2026-88771, 88772, 88779: Fixed Builds

Three exploited flaws in Citrix NetScaler ADC and NetScaler Gateway. On affected builds, one lets an unauthenticated attacker run commands in the default configuration. Another affects ADC and Gateway configurations with DTLS enabled, including VPN virtual servers with default settings. The third can cause denial of service when an appliance acts as a SAML service provider or identity provider. See the first builds that fix all three and the newer builds Citrix recommends for additional vulnerabilities.

Find your fixed build
By CalMax Systems Security Research · Published November 18, 2026 · Last updated: November 18, 2026

What are these NetScaler CVEs, and which build fixes them?

CVE-2026-88771 (CVSS 4.0 score 9.5) lets an unauthenticated attacker run arbitrary commands on any NetScaler ADC or Gateway on an affected build, including the default configuration. CVE-2026-88772 (9.5) is a memory overflow that can lead to remote code execution or denial of service when DTLS is enabled. CVE-2026-88779 (8.7) is a memory overflow that leads to denial of service on appliances configured as a SAML service provider or identity provider.

The first builds that fix all three are 14.1-73.41, 13.1-64.28, 14.1-73.41 FIPS and 13.1-37.282 for 13.1-FIPS and NDcPP. For upgrades today, use the newer builds listed below. The first fix builds, 14.1-73.37 and 13.1-64.23, do not fix CVE-2026-88779. Citrix has seen all three exploited, and CISA lists all three in its Known Exploited Vulnerabilities catalog.

Fixed NetScaler Builds by Branch

From Citrix bulletins CTX697096 (CVE-2026-88771 and -88772, published September 27, 2026) and CTX697174 (CVE-2026-88779, published October 3, 2026). Each fix applies to that build and later releases of the same branch.

Branch Vulnerable to CVE-2026-88771 and -88772 Vulnerable to CVE-2026-88779 First build that fixes all three, or later on the same branch
NetScaler ADC and Gateway 14.1Before 14.1-73.37Before 14.1-73.4114.1-73.41 or later
NetScaler ADC and Gateway 13.1Before 13.1-64.23Before 13.1-64.2813.1-64.28 or later of 13.1
NetScaler ADC 14.1-FIPSBefore 14.1-73.37 FIPSBefore 14.1-73.41 FIPS14.1-73.41 FIPS or later of 14.1-FIPS
NetScaler ADC 13.1-FIPS and 13.1-NDcPPBefore 13.1-37.279Before 13.1-37.28213.1-37.282 or later of 13.1-FIPS and 13.1-NDcPP
Secure Private Access hybrid deploymentsAffected through the NetScaler instances they useUpgrade those NetScaler instances using the branch-specific guidance below
Citrix-managed cloud services (Gateway Service, Citrix-managed Adaptive Authentication)Upgraded by CitrixNo customer action
Upgrade targets as of November 18, 2026. For customer-managed appliances, use the builds in Citrix’s November 12 bulletin or later releases on the same branch. The bulletin lists minimum fixed builds of 14.1-73.57, 13.1-64.39, 14.1-73.58 FIPS and 13.1-37.293 for 13.1-FIPS and 13.1-NDcPP. Citrix’s firmware page offers 14.1-73.58 for the standard 14.1 branch. Use this guidance even if you already installed the September or October fixes. Citrix bulletin CTX697191 identifies a separate vulnerability, CVE-2026-107406, that still affects the first CVE-2026-88779 fix builds when configured as a SAML identity provider. The November builds include that later fix.
Other notes from Citrix. Citrix says existing ICA sessions end during the November upgrade and users need to start new sessions afterward. If you run NetScaler Console 14.1 below 14.1-74.34, upgrade ADC and Gateway first, then upgrade Console to 14.1-74.34 or later. Citrix issued the Console update for a separate critical authentication bypass. Citrix says an upgrade from a Console build that predates Licensing Activation Service support requires an approved and applied extension if you still use legacy license files. The first bulletin also covers CVE-2026-88773 through CVE-2026-88778 (CVSS 4.0 scores 7.0 to 9.3). If your deployment meets the CVE-2026-88778 preconditions, apply Citrix’s Enhanced ISN Generation configuration change as part of remediation. The bulletins list fixes for the supported 14.1 and 13.1 branches. NetScaler ADC and Gateway 12.1 and 13.0 have reached end of life. Migrate those deployments to a supported fixed build. In its September guidance, Citrix identified the NetScaler VPX 15.1 Technology Preview firmware as vulnerable and said a fix was planned. Citrix restricts that firmware to evaluation and testing. Build 13.1-64.23 has a known issue that can cause a cyclic reboot during upgrade; if show ns variable returns any variables, Citrix said to plan for 13.1-64.24 instead (13.1-64.28 is later still). Before upgrading a SAML deployment, verify that its identity provider issues signed assertions. Citrix says the upgrade automatically replaces samlRejectUnsignedAssertion OFF with behavior that requires signed assertions. Always check the bulletins before upgrading, because Citrix can add builds after publication.

What the Three Flaws Do

Each one needs a different configuration. CVE-2026-88771 needs none.

CVE-2026-88771: command execution, every deployment

Citrix describes it as a remote code execution vulnerability caused by improper input validation (CWE-20) that “can allow an unauthenticated attacker to execute arbitrary commands.” The precondition is “All NetScaler ADC and NetScaler Gateway deployments (Default configuration / No additional feature required).” If an appliance runs an affected build, it is exposed, whatever it is used for. CVSS 4.0 base score 9.5 (Citrix); NVD scores it 9.8 under CVSS 3.1. The CVE record also lists CWE-20; CISA’s KEV entry lists CWE-119 instead. This page follows Citrix.

CVE-2026-88772: memory overflow through DTLS

A memory overflow (CWE-119) “leading to Remote Code Execution or Denial of Service.” It needs DTLS enabled on the appliance, and Citrix notes that DTLS is enabled by default on VPN virtual servers. On an affected build, a VPN virtual server meets the DTLS precondition unless DTLS is explicitly disabled. Other virtual servers meet it when configured with type DTLS. CVSS 4.0 base score 9.5 (Citrix); NVD scores it 8.1 under CVSS 3.1.

CVE-2026-88779: denial of service through SAML

A memory overflow (CWE-119) leading to denial of service when the appliance is configured as a SAML service provider (SP) or SAML identity provider (IdP). Citrix links it to deployments that use SAML authentication with Gateway or AAA virtual servers. Citrix says it has “observed targeted attacks on unmitigated NetScaler deployments which can lead to Denial of Service,” that the service may stay down if the condition is triggered repeatedly, and that it has “not identified an impact on the integrity of customer data.” Citrix rates it High; CVSS 4.0 base score 8.7, and NVD scores it 7.5 under CVSS 3.1.

Is your appliance at risk? Compare your build with the row for your branch, including FIPS or NDcPP where applicable. CVE-2026-88771 needs no special configuration. CVE-2026-88779 affects builds below the applicable October threshold when the appliance is a SAML SP or IdP, including the exact first fixed builds from September. These bulletins apply only to customer-managed NetScaler ADC and Gateway.

How to Check Your Build and Exposure

The configuration patterns come from the Citrix bulletins. Check the active configuration with show ns runningConfig. The file /nsconfig/ns.conf contains the saved configuration and can omit unsaved changes.

1. Find the running build

From the CLI (a standard NetScaler command, not from the bulletin):

show ns version

Compare the release and build with the table above. Check every appliance, including both nodes of an HA pair and any NetScaler instances used by Secure Private Access.

2. CVE-2026-88772: is DTLS on?

Search the configuration for the following examples. These add lines are configuration patterns for comparison. A VPN virtual server with no -dtls option has DTLS enabled by default.

add vpn vserver vpn1 SSL 10.0.0.0 443 -Listenpolicy NONE
    # DTLS not explicitly disabled, so DTLS is enabled

add vpn vserver vpn1 SSL 10.0.0.0 443 -dtls OFF -Listenpolicy NONE
    # DTLS explicitly disabled, precondition not met

add vpn vserver vs1 DTLS 10.11.1.1 443
add lb vserver vd_dtls DTLS 10.146.111.74 443 -persistenceType NONE -cltTimeout 120
    # DTLS enabled

3. CVE-2026-88779: is the appliance a SAML SP or IdP?

Citrix says the precondition is met if the configuration contains either of these entries:

add authentication samlAction        # SAML service provider (SP)
add authentication samlIdPProfile    # SAML identity provider (IdP)

Gateway and AAA virtual servers appear as add vpn vserver and add authentication vserver lines. Those are the deployments where Citrix says to look for SAML actions.

4. CVE-2026-88771: no check needed

Citrix says every deployment on an affected build meets the precondition. The build number is the only test.

Mitigations Until You Can Upgrade

Citrix gives no workaround for CVE-2026-88771 or CVE-2026-88772. Upgrading is the fix for all three.

CVE-2026-88771 and CVE-2026-88772: upgrade

Citrix “strongly urges affected customers” to install the updated builds as soon as possible. If upgrading is delayed, Mandiant recommends disabling DTLS on internet-facing Gateway virtual servers where it is unnecessary and restricting inbound UDP port 443 at an upstream firewall where DTLS is unnecessary. These controls reduce exposure to CVE-2026-88772. CVE-2026-88771 still requires a fixed build.

CVE-2026-88779: Global Deny List signatures (stopgap)

Citrix released signatures for the Global Deny List feature to reduce exposure while you plan the upgrade. They apply only when all of these are true:

Global Deny List is on by default from 14.1-60.52 and 13.1-63.21. To confirm the signatures are present, run the command below and check that, under “Name: *Default Signatures”, the Encrypted Version is a number of at least v24:

show appfw signatures

To confirm the rules are being evaluated, check the counters, including Last Hit Time; Citrix says a value greater than 0 means the rules are working:

stat denylist global AAA_REQUEST

Citrix says the signatures “can help to mitigate” the flaw and still recommends upgrading as soon as possible.

Logging and management access

Check for Signs of Compromise

CISA advises checking for signs of compromise before patching where possible. If you suspect compromise, preserve forensic evidence before applying updates because an update can reduce forensic visibility. CISA's October 9 update also advises investigating suspected compromises involving CVE-2026-88779. When investigating an unexpected restart on a SAML-enabled appliance that was vulnerable to CVE-2026-88779, include checks for CVE-2026-88771 compromise if the appliance was also vulnerable to that flaw.

Citrix: an update “does not remove potential compromise artifacts or prove that exploitation did not occur before the update.”

Indicators from Citrix

Citrix did not publish file names, hashes or IP addresses in the bulletins. For CVE-2026-88771 through CVE-2026-88778 it provides generic indicators through an IoC scan in NetScaler Console, from the Security Advisory page:

  • Available in NetScaler Console service and in NetScaler Console on-premises with Cloud Connect, version 14.1-73.36 and later.
  • Requires the telemetry channel to be enabled. You accept the legal terms and start the scan manually. Citrix may update the detection logic; the page shows when it was last updated.
  • If you cannot run the scan, contact Citrix Support for help running it. The Console IoC feature currently excludes NetScaler BLX.

Citrix warns that the indicators do not cover every technique attackers use, “might be of limited forensic value and might fail to identify actual compromises,” and advises using experienced forensic investigators. CISA’s catalog entries for CVE-2026-88771 and CVE-2026-88772 note that the provided NetScaler Console indicators may help identify exploitation. For all three CVEs, federal civilian executive branch agencies should evaluate each affected asset and follow the applicable remediation and forensic triage requirements under BOD 26-04. Citrix’s published guidance for CVE-2026-88779 gives no IOC list. For CVE-2026-88772, Mandiant and Google Threat Intelligence Group published indicators from their investigation of in-the-wild exploitation. Use those indicators to hunt for the activity they observed.

NetScaler Console File Integrity Monitoring can also flag unexpected changes to monitored files on managed appliances.

If you suspect compromise (Citrix CTX694799)

Citrix recommends deploying a new, updated NetScaler instance rather than relying on the update to clean an appliance. Its compromise article lists these steps:

  1. Preserve evidence. Snapshot a VPX instance. Record system time, time zone and NTP settings. Keep logs from remote syslog and NetScaler Console as well as local logs. Generate a technical support bundle and a Packet Engine core file (this causes a warm restart). For MPX or SDX hardware, follow your incident response team’s disk-imaging process.
  2. Isolate the appliance from the network. For an HA pair, Mandiant recommends assessing both nodes independently and disabling configuration synchronization until both have been validated.
  3. Revoke credentials and access. Change every service-account password and secret stored on the NetScaler on the systems they belong to (LDAP service accounts, RADIUS shared secrets, OAuth tokens, API keys, SNMP community names). Change the passwords of all user accounts that may have authenticated through the appliance, including through Gateway or AAA virtual servers. Revoke the certificates and private keys stored on it.
  4. Investigate connected systems, especially authentication servers, sensitive systems, web-tier systems and management jump hosts.
  5. Rebuild and restore. Wipe and reinstall MPX appliances. Replace compromised VPX instances, including those hosted on SDX. Upgrade to the latest firmware before restoring a known-good backup that predates the compromise.
  6. Rotate restored secrets. Change all local NetScaler passwords, rotate Key Encryption Keys, and replace all restored SSL certificates.
  7. Harden and watch. Follow the NetScaler Secure Deployment Guide and monitor the rebuilt system closely for at least 90 days.

If compromise is suspected, Mandiant recommends revoking active administrative, Gateway and VPN sessions, including ICA/HDX sessions where appropriate, as part of containment. If law enforcement may be involved, Citrix says to consult legal counsel before rebuilding.

Timeline

DateEvent
September 27, 2026Citrix publishes bulletin CTX697096 for CVE-2026-88771 through CVE-2026-88778 and says CVE-2026-88771 and CVE-2026-88772 have been exploited. CISA adds both to the Known Exploited Vulnerabilities catalog.
September 30, 2026CISA KEV catalog due date for CVE-2026-88771 and CVE-2026-88772. Federal civilian executive branch agencies must apply the BOD 26-04 timeline for each affected asset. Citrix’s blog post on the first bulletin is last updated.
October 3, 2026 (Pacific time)Citrix publishes bulletin CTX697174 for CVE-2026-88779, with new fix builds 14.1-73.41 and 13.1-64.28, and reports targeted attacks.
October 4, 2026CISA adds CVE-2026-88779 to the Known Exploited Vulnerabilities catalog.
October 7, 2026CISA KEV catalog due date for CVE-2026-88779. Federal civilian executive branch agencies must apply the BOD 26-04 timeline for each affected asset.

Where ThreatListPro Fits

A known-attacker list can cut noise at the edge. It does not fix these flaws.

All three CVEs are fixed by upgrading NetScaler. An IP blocklist filters traffic from listed sources. Apply the vendor updates to address these flaws.

As defense in depth, Citrix suggests perimeter firewall rules that block traffic from known attack sources. If a firewall sits in front of your NetScaler Gateway, you can load ThreatListPro on that firewall; the setup instructions cover each supported platform. ThreatListPro covers 5.4M+ IPv4 addresses from real attacks on live production Palo Alto GlobalProtect VPN portals in the US and is checked for new attackers every 6 hours. The feed is built from observed attacks on VPN logins. Use it as a source-IP filter in front of your VPN and follow Citrix’s patch guidance for these CVEs.

NetScaler CVE-2026-88771, 88772 and 88779 FAQs

Are CVE-2026-88771, CVE-2026-88772 and CVE-2026-88779 being exploited?

Yes. Citrix says exploitation of CVE-2026-88771 and CVE-2026-88772 on unmitigated NetScaler deployments has been observed, and that it has observed targeted attacks using CVE-2026-88779 that can lead to denial of service. CISA added CVE-2026-88771 and CVE-2026-88772 to its Known Exploited Vulnerabilities catalog on September 27, 2026, and CVE-2026-88779 on October 4, 2026.

Which NetScaler build fixes all three CVEs?

NetScaler ADC and Gateway 14.1-73.41 or later, or 13.1-64.28 or later on the 13.1 branch. For FIPS builds, 14.1-73.41 FIPS or later, and 13.1-37.282 or later for 13.1-FIPS and 13.1-NDcPP. The earlier fix builds 14.1-73.37 and 13.1-64.23 fix CVE-2026-88771 and CVE-2026-88772 but not CVE-2026-88779.

I already upgraded to 14.1-73.37 or 13.1-64.23. Am I done?

Upgrade to the branch-specific builds from Citrix’s November 12 bulletin or later releases, even if you installed the September fixes and do not use SAML. The September builds address CVE-2026-88771 and CVE-2026-88772. The November builds also address CVE-2026-88779 and additional vulnerabilities, including one that affects the default configuration.

Is my NetScaler affected if I only use it as a load balancer?

Yes, for CVE-2026-88771. Citrix says every NetScaler ADC and NetScaler Gateway deployment on an affected build is vulnerable to it, including the default configuration, with no extra feature required. CVE-2026-88772 needs DTLS, which is on by default on VPN virtual servers, and CVE-2026-88779 needs a SAML service provider or identity provider configuration.

Is there a workaround?

Citrix directs customers to install the fixed builds for CVE-2026-88771 and CVE-2026-88772. If upgrading is delayed, Mandiant recommends disabling unneeded DTLS and restricting unneeded inbound UDP port 443 upstream to reduce exposure to CVE-2026-88772. For CVE-2026-88779, Citrix released Global Deny List signatures as a stopgap, but only for appliances already on 14.1-73.37 up to before 14.1-73.41, or 13.1-64.23 up to before 13.1-64.28, managed by NetScaler Console service or NetScaler Console on-premises with Cloud Connect, with virtual patching enabled. Citrix still recommends upgrading.

Do I need to kill active sessions after upgrading?

Citrix says the November upgrade ends existing ICA sessions. Users need to start new sessions afterward. If compromise is suspected, Mandiant recommends revoking active administrative, Gateway and VPN sessions, including ICA/HDX sessions where appropriate. Citrix does say an update does not remove compromise artifacts or prove that exploitation did not happen before it. If you suspect compromise, follow Citrix article CTX694799: preserve evidence, isolate the appliance, change every credential and secret it held, revoke its certificates and rebuild it on a fixed build.

What are the indicators of compromise?

Citrix did not publish a public IOC list in the bulletins. For CVE-2026-88771 through CVE-2026-88778 it provides generic indicators through a manual IoC scan in NetScaler Console service or on-premises with Cloud Connect, starting with version 14.1-73.36 and with telemetry enabled. Customers who cannot run the scan can contact Citrix Support. Citrix warns that the scan may miss compromises. Mandiant and Google Threat Intelligence Group also published public indicators from their CVE-2026-88772 investigation.

Sources

Block Known VPN Attackers at Your Firewall

ThreatListPro covers 5.4M+ IPv4 addresses and is checked for new attackers every 6 hours, as a plain-text feed for the firewall in front of your VPN. Monthly is $19.99 with a 14-day free trial and no card needed.

Start a 14-day free trial Or test the free sample first: no signup

Firewall Guides

ThreatListPro uses a plain-text feed for firewalls that support external IPv4 address lists.

Palo Alto FortiGate pfSense OPNsense SonicWall Cisco ASA Sophos XG UniFi

Related Resources

More dated alerts on exploited VPN and remote-access flaws, and the attacks that hit VPN logins.

All Security Alerts Ivanti Connect Secure CVE-2026-104935 EDL Setup Instructions for Every Major Firewall Block an IP Address at the Firewall VPN Brute Force Explained Password Spraying on VPNs